Shandong Xiangtong Rubber Science Co.,Ltd
XTO Belt Conveys the World
Add to Cart
Usage
The Pipe Steel Cord Conveyor Belt is widely in various industries such as mining, steel, cement, construction and many more. It is suitable for conveying materials over long distances, steep inclines, and around tight curves.It is mainly for conveying powder, granular and other materials that are easy to pollute the environment.
Characteristics
1.Reduction of maintenance and cleaning costs due to avoiding spillage and loss of material along the conveyor
2.Protection of the conveyed material from external influences like dust, rain or wind
3.Protection of the environment from pollution by the conveyed material
4.Large Angle transmission, transmission Angle is usually up to 30 degrees
Technical Details
1.Pipe steel cord conveyor belt can be guided through tight horizontal and vertical curves as it is supported by a set of 6 idlers. This results in the reduction of transfer points and an improved adaption to the existing topology of terrain or existing factory buildings
2.Higher inclination angles can be achieved as the inner side of the Pipe offers more contact surface to the conveyed material compared to a regular steel cord conveyor belt
Standard Specifications
| Model | Tensile Strength(N/mm) | Cord Pitch (mm) | Cord Diameter (mm) | Min Cover thickness (mm) | Width (mm) | Pipe diameters (mm) |
| ST630 | 630 | 10 | 3 | 4 |
800-2400 |
100 150 200 250 300 350 400 450 500 550 600 |
| ST800 | 800 | 10 | 3.5 | 4 | ||
| ST1000 | 1000 | 12 | 4 | 4 | ||
| ST1250 | 1250 | 12 | 4.5 | 4 | ||
| ST1600 | 1600 | 12 | 5 | 4 | ||
| ST2000 | 2000 | 12 | 6 | 4 | ||
| ST2500 | 2500 | 15 | 7.2 | 5 | ||
| ST3150 | 3150 | 15 | 8.1 | 5.5 | ||
| ST3500 | 3500 | 15 | 8.6 | 6 | ||
| ST4000 | 4000 | 15 | 8.9 | 6.5 | ||
| ST4500 | 4500 | 16 | 9.7 | 7 | ||
| ST5000 | 5000 | 17 | 10.9 | 7.5 | ||
| ST5400 | 5400 | 17 | 11.3 | 8 | ||
| ST6300 | 6300 | 19.5 | 12.8 | 10 | ||
| ST7000 | 7000 | 19.5 | 13.5 | 10 | ||
| ST7500 | 7500 | 21 | 15 | 10 |
Note: Cover thickness, cord diameter, and cord pitch can be manufactured according to customer’s requirements.
Cover Grades
In accordance with HG/T 4224-2011 standard
|
Grade | Tensile strength min. (ISO37) Mpa | Elongation at break (ISO37) % | Abrasion max. (ISO4649) mm³ | Change of tensile strength and elongation at break after hot air aging % |
| H | 25 | 450 | 120 | -25 ~ +25 |
| D | 18 | 400 | 90 | -25 ~ +25 |
| L | 20 | 400 | 150 | -25 ~ +25 |
| 1.Ozone resistant test condition: (50±5)pphm, 40±2℃, elongation: (20±2)%, time 96hours. 2.Hot air aging test condition:70℃×168h | ||||
The standard values in the table above help to select the appropriate covering adhesive for practical use. The reliable evaluation of the wear and cutting resistance of the covering adhesive cannot be determined by the tensile strength, elon
Applications
1.Mining Industry: Widely used in coal mines, gold mines, iron mines, and other mining operations for conveying raw materials and ores.
2.Ports and Docks: Utilized for loading and unloading cargo at docks, especially for bulk cargo such as coal, ores, grains, etc.
3.Construction Materials Industry: Employed for conveying materials like cement, sand, gravel, and lime in industries such as cement plants or gravel yards.
4.Metallurgical Industry: Used for transporting raw materials like iron ore, coal, and for conveying metal products, such as in iron and steel plants.
5.Chemical Industry: In chemical plants, these belts are used for conveying granular, lumpy, or powdered chemical materials and products.
6.Power Industry: Employed in coal-fired power plants for coal transportation, as well as for other power-related applications.
Certifications
We passed ISO9001, ISO14001, ISO45001. And our products have repeatedly passed the quality testing in RWE, TUV and BV. In addition, we have passed 46 safety mark certificates of the China Mineral products and have obtained 27 national utility model patents and 3 invention patents.
Perfect Testing Equipment
We have a strong ability to develop new products. The company has an area of 3800 square meters of scientific research building.Four rubber material laboratories have been established, including material testing, formula testing, rubber mixing test and finished product testing, truly realize the strict control testing from raw materials to finished products, to ensure that the quality of products to meet the needs of users.
Why Choose Us?
Cooperative Partner
We are proud to have established long-term partnerships with many outstanding companies. These partners come from different industries, such as mining, manufacturing, logistics and transportation. For example, Ordered by BHP, RIO-TINTO, VALE repeatedly.We are committed to providing customers with efficient and reliable material handling solutions, and through close cooperation, we realize the sharing of resources and complementary advantages, and create greater value for customers.